Karadeniz Teknik Üniversitesi
Akademik Veri Yönetim Sistemi
Yayınlar & Eserler
SCI,SSCI,AHCI İNDEKSLERİNE GİREN DERGİLERDE YAYINLANAN MAKALELER
Öztürk B., Topcu A., Öztürk S., Cora Ö.N., "Oxidation, electrical and mechanical properties of Crofer®22 solid oxide fuel cell metallic interconnects manufactured through powder metallurgy", INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, vol.43, pp.10822-10833, 2018 (Link) (Abstract)
Güner F., Cora Ö.N., Sofuoğlu H., "Effects of friction models on the compaction behavior of copper powder", TRIBOLOGY INTERNATIONAL, vol.122, pp.125-132, 2018 (Link) (Abstract)
Kaya İ., Cora Ö.N., Acar D., Koç M., "On the Formability of Ultrasonic Additive Manufactured Al-Ti Laminated Composites", METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.49, pp.5051-5064, 2018 (Link) (Abstract)
Acar D., Türköz M., Gedikli H., Halkaci H.S., Cora Ö.N., "Warm Hydromechanical Deep Drawing of AA 5754-O and Optimization of Process Parameters", JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, vol.140, no.MATS-16-1283, pp.1-8, 2018 (Link) (Abstract)
Ekmekci D., Yilmaz F., Kölemen U., Cora Ö.N., "Microindentation on the porous copper surface modulations", APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, vol.123, no.705, pp.1-9, 2017 (Link) (Abstract)
Öztürk S., İcin K., Öztürk B., Topal U. , Göbülük M. , Kaftelen Odabaşı H., et al., "Enhanced Magnetic Properties of Nd15Fe77B8 Alloy Powders Produced by Melt-Spinning Technique", METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, vol.48, no.1, pp.5017-5030, 2017 (Link) (Abstract)
Guler C., Keles A., Guler M.S., Karagoz S., Cora Ö.N., Keskin G., "Thermal conductivity of different colored compomers", JOURNAL OF APPLIED BIOMATERIALS & FUNCTIONAL MATERIALS, vol.15, pp.362-368, 2017 (Link) (Abstract)
Güner F., Sofuoğlu H., Cora Ö.N., "An investigation of contact interactions in powder compaction process through variable friction models", TRIBOLOGY INTERNATIONAL, vol.96, pp.1-10, 2016 (Link) (Abstract)
Çetin M.E., Demirtaş M., Sofuoğlu H., Cora Ö.N., Pürçek G., "Effects of grain size on room temperature deformation behavior of Zn-22Al alloy under uniaxial and biaxial loading conditions", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, vol.672, pp.78-87, 2016 (Link) (Abstract)
Güner F., Cora Ö.N., Sofuoğlu H., "Numerical modeling of cold powder compaction using multi particle and continuum media approaches", POWDER TECHNOLOGY, vol.271, pp.238-247, 2015
Cora Ö.N., Dur E., Koç M., "Effect Of Manufacturing Process Sequence On The Corrosion Resistance Characteristics Of Coated Metallic Bipolar Plates", JOURNAL OF POWER SOURCES, vol.246, pp.788-799, 2014
Cora Ö.N., Turan C., Koç M., "Investigation Of The Effects Of Process Sequence On The Contact Resistance Characteristics Of Coated Metallic Bipolar Plates For Polymer Electrolyte Membrane Fuel Cells", JOURNAL OF POWER SOURCES, vol.243, pp.925-934, 2013 (Link) (Abstract)
Cora Ö.N., Ağcayazi A., Namiki K., Sofuoğlu H., Koç M., "Die Wear In Stamping Of Advanced High Strength Steels - Investigations On The Effects Of Substrate Material And Hard-Coatings", TRIBOLOGY INTERNATIONAL, vol.52, pp.50-60, 2012
Cora Ö.N., Turan C., Koç M., "Contact Resistance Characteristics Of Coated Metallic Bipolar Plates For Pem Fuel Cells - Investigations On The Effect Of Manufacturing", INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, vol.37, pp.18187-18204, 2012
Koç M., Billur E., Cora Ö.N., "An experimental study on the comparative assessment of hydraulic bulge test analysis methods", MATERIALS, vol.32, pp.272-281, 2011
Cora Ö.N., Gedikli H., Koç M., "Comparative Investigations On Numerical Modeling For Warm Hydroforming Of Aa5754-O Aluminum Sheet Alloy", MATERIALS, vol.32, pp.2650-2662, 2011
Cora Ö.N., Dur E., Koç M., "Effect Of Manufacturing Conditions On The Corrosion Resistance Behavior Of Mettalic Bipolar Plates In Proton Exchange Membrance Fuel Cells", JOURNAL OF POWER SOURCES, vol.196, pp.1235-1241, 2011
Cora Ö.N., Dur E., Koç M., "Experimental Investigations On The Corrosion Resistance Characteristics Of Coated Metallic Bipolar Plates For Pemfc", INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, vol.36, pp.7162-7173, 2011
Cora Ö.N., Turan C., Koç M., "Effect Of Manufacturing Processes On Contact Resistance Characteristics Of Metallic Bipolar Plates In Pem Fuel Cells", INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, vol.36, pp.12370-12380, 2011
Cora Ö.N., Peker M.F., Koç M., "Investigations On The Variation Of Corrosion And Contact Resistance Characteristics Of Metallic Bipolar Plates Manufactured Under Long-Run Conditions", INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, vol.36, pp.15427-15436, 2011
Cora Ö.N., Kaviany M., Koç M., Min D., "Microscale-Modulated Porous Coatings: Fabrication And Pool-Boiling Heat Transfer Performance", JOURNAL OF MICROMECHANICS AND MICROENGINEERING, vol.20, 2010
Cora Ö.N., Mahabunphachai S., Koç M., "Effect Of Manufacturing Processes On Formability And Surface Topography Of Proton Exchange Membrane Fuel Cell Metallic Bipolar Plates", JOURNAL OF POWER SOURCES, vol.195, pp.5269-5277, 2010
Cora Ö.N., Koc M., "Experimental Investigations On Wear Resistance Characteristics Of Alternative Die Materials For Stamping Of Advanced High-Strength Steels (Ahss)", INTERNATIONAL JOURNAL OF MACHINE TOOLS, vol.49, pp.897-905, 2009
Cora Ö.N., Namiki K., Koc M., "Wear Performance Assessment Of Alternative Stamping Die Materials Utilizing A Novel Test System", WEAR, vol.267, pp.1123-1129, 2009
Cora Ö.N., Usta Y., Koç M., "Micro-Manufacturing Of Micro-Scale Porous Surface Structures For Enhanced Heat Transfer Applications: An Experimental Process Optimization Study", JOURNAL OF MICROMECHANICS AND MICROENGINEERING, vol.19, 2009
Cora Ö.N., Kaviany M., Min D.H., Hwang G.S., Usta Y., Koç M., "2-D And 3-D Modulated Porous Coatings For Enhanced Pool Boiling", INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, vol.52, pp.2607-2613, 2009
Cora Ö.N., Koc M., "Influence Of Substrate Material On Wear Performance Of Stamping Dies Utilizing A New Die Wear Test System", Transactions of the North American Manufacturing Research Institute of SME, vol.37, pp.325-331, 2009 (Abstract)
Cora Ö.N., Akkök M., Darendeliler H., "Modelling Of Variable Friction In Cold Forging", PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, vol.222, pp.899-908, 2008
DİĞER DERGİLERDE YAYINLANAN MAKALELER
Cora Ö.N., Koç M., "Wear resistance evaluation of hard-coatings for sheet blanking die", Procedia Manufacturing, vol.15, pp.590-596, 2018 (Link) (Abstract)
Acar D., Türköz M., Dilmeç M. , Halkaci H.S., Gedikli H., Cora Ö.N., "Ilık Hidromekanik Derin Çekme Prosesinde Optimum Şekillendirme Parametrelerinin Belirlenmesi", Ordu Üniversitesi Bilim ve Teknoloji Dergisi, cilt.6, no.2, ss.38-47, 2016
Acar D., Türköz M., Gedikli H., Cora Ö.N., "Finite Element Analysis And Experimental Validation Of Warm Hydromechanical Deep Drawing Process ", Applied Mechanics and Materials, vol.686, pp.535-539, 2014 (Link) (Abstract)
Köse S., Cora Ö.N., Sofuoğlu H., "Mikro İmalat Yöntemiyle Yüzey Şekillendirmenin Dental İmplant Uygulamalarindaki Osseointegrasyona Etkisi ", Süleyman Demirel Üniversitesi Mühendislik Bilimleri ve Tasarım Dergisi, cilt.2, ss.221-227, 2014 (Link) (Özet) (Abstract)
Cora Ö.N., Gedikli H., Koç M., "Parametric Investigation Of Circular And Elliptical Bulge Test In Warm Hydroforming Process For Aa5754-O ", Key Engineering Materials, vol.473, pp.594-601, 2011 (Link)
HAKEMLİ KONGRE / SEMPOZYUMLARIN BİLDİRİ KİTAPLARINDA YER ALAN YAYINLAR
Acar D., Cora Ö.N., "Solid Particle Erosion Performance of Ti-6Al-4V as Erosion Shield Material ", 1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), KARABÜK, TÜRKIYE, 22-24 Mart 2018, pp.109-110 (Link) (Abstract)
Topcu A., Öztürk B., Cora Ö.N., "DETERMINATION OF OPTIMUM FLOW FIELD FOR SOLID OXIDE FUEL CELL (SOFC) INTERCONNECTS UNDER SPECIFIED CONDITIONS", 16th International Conference on Clean Energy (ICCE-2018), Famagusta, KUZEY KIBRIS TÜRK CUM., 9-11 Mayıs 2018, pp.1-6 (Link) (Abstract)
Acar D., Cora Ö.N., "Formability Enhancement of AA5754-O Aluminium Alloy via Double-sided Hydroforming ", 1st International Symposium on Light Alloys and Composite Materials, KARABÜK, TÜRKIYE, 22-24 Mart 2018, pp.107-108 (Link) (Abstract)
Cora Ö.N., Kaya İ., "Ultrasonik Eklemeli İmalat Yönteminin Gömülü Sistem Üretimine Yönelik Uygulamaları", ASELSAN 3. MALZEME TEKNOLOJİLERİ ÇALIŞTAYI, ANKARA, TÜRKIYE, 10-11 Mayıs 2018, ss.1-30
Topcu A., Cora Ö.N., "Experimental and Numerical Investigations on the Upsetting of AA6082-T6 Alloy at Room Temperature ", 1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), KARABÜK, TÜRKIYE, 22-24 Mart 2018, pp.377-377 (Link)
Çetin M.E., Cora Ö.N., Sofuoğlu H., "Zn-22Al Alaşımının Mikro Derin Çekilebilirliğine Zımba Hızının Etkisinin İncelenmesi ", 1st International Symposium on Light Alloys and Composite Materials (ISLAC’18), KARABÜK, TÜRKIYE, 22-24 Mart 2018, pp.465-466 (Link) (Özet)
Çetin M.E., Demirtaş M., Pürçek G., Cora Ö.N., Sofuoğlu H., "Experimental and Numerical Investigation of Thickness Distribution in Forming of Superplastic Zn-22Al Alloy", 6th International Symposium on Innovative Technologies in Engineering and Science (ISITES2018) , ANTALYA, TÜRKIYE, 9-11 Kasım 2018, pp.1034-1040 (Link) (Özet) (Abstract)
Acar D., Cora Ö.N., "Hydroformability of Advanced High Strength Steels Through FEA", 3rd International Iron and Steel Symposium, KARABÜK, TÜRKIYE, 3-5 Nisan 2017, pp.74-78 (Link) (Abstract)
Cora Ö.N., "Nanoindentation response of dual phase steels", Nanobrücken 2017: European Nanomechanical Testing Conference and Hysitron User Meeting, Manchester, INGILTERE, 4-6 Nisan 2017, pp.24-24 (Link)
Acar D., Tan H.O., Cora Ö.N., "Effect of Surface Texturing on Tribological Performance of Ultra-High Molecular Weight Polyurethene", 3rd International Conference on Engineering and Natural Sciences, ICENS, Budapeşte, MACARISTAN, 3-5 Mayıs 2017, pp.xxx-xxx
Acar D., Meriç D., Budur A.İ., Gümrük R., Sofuoğlu H., Gedikli H., et al., "Experimental investigations on particle erosion behavior of AA 6061 alloy", 9th Ankara International Aerospace Conference, ANKARA, TÜRKIYE, 20-22 Eylül 2017, pp.1-10 (Link) (Abstract)
Öztürk B., Topcu A., Öztürk S., Cora Ö.N., "Bonding Strength and Fuel Leakage Tests for Crofer®22 Solid Oxide Fuel Cell Metallic Interconnects", Second International Hydrogen Technologies Congress, ADANA, TÜRKIYE, 15-18 Mart 2017, pp.287-293 (Link) (Abstract)
Çam S., Sofuoğlu H., Cora Ö.N., "AA 6013 Alaşımının Halka Basma Testi ve Sonlu Elemanlar Analizi", 20. ULUSAL MEKANİK KONGRESİ, BURSA, TÜRKIYE, 5-9 Eylül 2017, ss.427-435 (Link) (Özet) (Abstract)
Çetin M.E., Demirtaş M. , Sofuoğlu H., Cora Ö.N., Pürçek G., "EFFECT OF GRAIN SIZE ON MICROHARDNESS OF SUPERPLASTIC ZN22AL ALLOY", International Conference on Engineering Technologies (ICENTE’17), KONYA, TÜRKIYE, 7-9 Aralık 2017, pp.65-65 (Link) (Abstract)
Ekmekci D., Cora Ö.N., "İleri Yüksek Mukavemetli DP800 Çeliğinin Mekanik Özelliklerinde Girinim Yükleme Tiplerinin Etkisi", International Conference on Multidisciplinary, Engineering, Science, Education and Technology (IMESET’17 Bitlis), BİTLİS, TÜRKIYE, 27-29 Ekim 2017, pp.372-372 (Link) (Özet)
Öztürk B., Cora Ö.N., Öztürk S., Bakal A., Topcu A., "EFFECT OF PRODUCTION PARAMETERS ON PHYSICAL PROPERTIES OF THE INTERCONNECT PLATES PRODUCED BY POWDER METALLURGY", International Conference on Material Science and Technology in Cappadocia (IMSTEC 2016), NEVŞEHİR, TÜRKIYE, 6-6 Nisan 2016, pp.832-837
Cora Ö.N., Güler M.S., "Sustainable Aviation and Projections for Aviation Industry", 3rd International Conference on Computational and Experimental Science and Engineering (ICCESEN 2016), ANTALYA, TÜRKIYE, 19-24 Ekim 2016, pp.704-704
Cora Ö.N., Acar D., "Energy Generation Based on Salinity Gradient: Current Trends and Projections", 3rd International Conference on Computational and Experimental Science and Engineering (ICCESEN 2016), ANTALYA, TÜRKIYE, 19-24 Ekim 2016, pp.250-250
Ekmekci D., Cora Ö.N., "EFFECT OF INDENTATION FORCE ON THE MECHANICAL PROPERTIES OF ADVANCED HIGH STRENGTH STEELS", 16th International Materials Symposium (IMSP’2016), DENİZLİ, TÜRKIYE, 12-14 Ekim 2016, pp.624-631 (Link)
Ekmekci D., Kölemen U., Yilmaz F., Cora Ö.N., "NANOINDENTATION ON CU POWDER AND ITS FINITE ELEMENT MODELING", 16th International Materials Symposium (IMSP’2016), DENİZLİ, TÜRKIYE, 12-14 Ekim 2016, pp.1-1 (Link)
Acar D., Meriç D., Sofuoğlu H., Gümrük R., Cora Ö.N., Gedikli H., "Helikopter Palinin Aşınma Kalkanında Meydana Gelen Katı Parçacık Erozyonunun İncelenmesi İçin Bir Test Düzeneği ve Tasarımı", Ulusal Havacılık ve Uzay Kongresi 2016, KOCAELİ, TÜRKIYE, 28-30 Eylül 2016, ss.1082-1094
Acar D., Cora Ö.N., "AA 5754-O Alaşımının Hidroşekillendirilmesinde Etkin Parametrelerin Optimizasyonu", 8. OTOMOTİV TEKNOLOJİLERİ KONGRESİ, BURSA, TÜRKIYE, 23-24 Mayıs 2016, cilt.1, no.1, ss.153-158
Güner F., Sofuoğlu H., Cora Ö.N., "Numerical investigation of coefficient of friction in copper powder compaction process at micro scale", 7th International Conference on : Mechanical and Aerospace Engineering (ICMAE), 2016, Londra, INGILTERE, 18-20 Temmuz 2016, pp.1-5 (Link)
Kaya İ., Cora Ö.N., Koç M., "MATERIAL CHARACTERIZATION OF ULTRASONICALLY CONSOLIDATED LAMINATED TI-AL COMPOSITES (UC-LMC) ", ASME 2015 International Mechanical Engineering Congress & Exposition 2015 IMECE , Houston, ABD, 13-19 Kasım 2015, vol.2015, no.IMECE2015-50566, pp.1-6 (Link)
Cora Ö.N., Öztürk B., Öztürk S., Gölbaşi Z., "INVESTIGATION OF THE MECHANICAL AND TRIBOLOGICAL PROPERTIES OF Ti-6Al-XNb ALLOYS", International Porous and Powder Materials Symposium and Exhibition, PPM 2015, İZMİR, TÜRKIYE, 15-18 Eylül 2015, pp.323-328 (Abstract)
Cora Ö.N., Ağcayazi A., Koç M., "STAMPING DIE WEAR INVESTIGATION WITH DIFFERENT HARD-COATINGS", 1st International Conference on Tribology, İSTANBUL, TÜRKIYE, 7-9 Ekim 2015, pp.1-6
Mercan H., Altunkaya Ö., Cora Ö.N., "Recent Trends in Energy Generation Based on Salinity Gradient: Pressure Retarded Osmosis ", 1st International Conference on Green Chemistry and Sustainable Technologies 2015, İZMİR, TÜRKIYE, 30 Eylül - 3 Ekim 2015, pp.59-59
Çetin M.E., Demirtaş M., Sofuoğlu H., Cora Ö.N., Pürçek G., "Süperplastik Zn-22Al Alaşımında Ultra İnce Tane Oluşumunun Oda Sıcaklığındaki Şekillendirilebilirliğe Etkisinin Deneysel ve Teorik Olarak İncelenmesi", 19. Ulusal Mekanik Kongresi, TRABZON, TÜRKIYE, 24-28 Ağustos 2015, ss.3-3
Acar D., Türköz M. , Gedikli H., Cora Ö.N., Halkaci H.S., "Ilık Hidromekanik Derin Çekme Prosesinin Sonlu elemanlar Analizi ve Parametrik Optimizasyonu", 19. Ulusal Mekanik Kongresi, TRABZON, TÜRKIYE, 24-28 Ağustos 2015, ss.1-4
Öztürk B., Yalçin Ö.F., Cora Ö.N., Öztürk S., Göbülük M., "Nikel Tozu ile Üretilen Mikroyapılı Yüzeylerde Üretim Parametrelerinin Gözeneklilik ve Mikrosertliğe Etkisi", 7th International Powder Metallurgy Conference and Exhibiton, ANKARA, TÜRKIYE, 24 Haziran 2014 - 28 Haziran 2015, pp.78-79
Güner F., Cora Ö.N., Sofuoğlu H., "Metal Tozu Presleme Prosesinde Malzeme Modeli ve Sürtünme Etkisinin Sonlu Elemanlar Yöntemi ile Analizi", 7th International Powder Metallurgy Conference and Exhibiton, ANKARA, TÜRKIYE, 26-28 Haziran 2014, pp.114-115
Acar D., Türköz M., Gedikli H., Cora Ö.N., "Finite Element Analysis And Experimental Validation Of Warm Hydromechanical Deep Drawing Process ", 5th International Conference on Information Technology for Manufacturing Systems (ITMS 2014), Singapur, SİNGAPUR, 16-17 Eylül 2014, vol.686, pp.535-539 (Link) (Abstract)
Cora Ö.N., Koç M., "PROMISES AND PROBLEMS OF ULTRA/ADVANCED HIGH STRENGTH STEEL (U/AHSS) UTILIZATION IN AUTOMOTIVE INDUSTRY", 7th Automotive Technologies Congress, BURSA, TÜRKIYE, 26-27 Mayıs 2014, pp.1-8 (Link) (Abstract)
Köse S., Cora Ö.N., Sofuoğlu H., "Mikro İmalat Yöntemiyle Yüzey Şekilendirmenin Dental İmplant Uygulamalarındaki Oseointegrasyona Etkisi", VII. Ulusal Biyomekanik Kongresi, ISPARTA, TÜRKIYE, 16-18 Ekim 2014, ss.221-227 (Link) (Özet) (Abstract)
Öztürk B., Yalçin Ö.F., Cora Ö.N., Öztürk S., Göbülük M., "Toz Metalurjisi Yöntemi ile Üretilen İnterkonnektör Plakaların Üretim Parametrelerinin Gözeneklilik ve Isıl Genleşme Katsayılarına Etkisi", 7th International Powder Metallurgy Conference and Exhibiton, ANKARA, TÜRKIYE, 24-28 Haziran 2014, pp.80-81
Güner F., Cora Ö.N., Sofuoğlu H., "Soğuk Toz Presleme Prosesinin Ayrık Sonlu Eleman Analizi", MSC Software Türkiye konferansı, İSTANBUL, TÜRKIYE, 27-28 Mayıs 2013, ss.1-10
Güner F., Cora Ö.N., Sofuoğlu H., "Discrete Element Modeling of Spherical Copper Powder Compaction Process", International Porous and Powder Materials Symposium and Exhibition, İZMİR, TÜRKIYE, 3-6 Eylül 2013, pp.732-736
Çetin M.E., Cora Ö.N., Sofuoğlu H., "Mikro Derin Çekme İşleminde Numune Boyut Etkisinin Sonlu Elemanlar Yöntemiyle İncelenmesi", 18. Ulusal Mekanik Kongresi , MANİSA, TÜRKIYE, 26-30 Ağustos 2013, ss.176-185
Cora Ö.N., Namiki K., Koç M., Blau P.J., "Investigations On The Effect Of Coating Material And Method On Die Wear In Stamping Of Advanced High Strength Steels", ASME - International Mechanical Engineering Congress & Exposition IMECE2013, San Diego, CA, ABD, 15-21 Kasım 2013, pp.1-6 (Link) (Abstract)
Cora Ö.N., Namiki K., Koç M., Blau P.J., "Effect Of Coating Type On Wear Performance Of Ahss Forming Dies Using A Cylinder-On-Flat Wear Test Methods", Materials Science & Technology- MS&T 2013, Montreal, KANADA, 27-31 Ekim 2013, pp.1-1
Cora Ö.N., Karali M., Koç M., "DP780 Çelik Sacların Mekanik Özelliklerinin Hidro-şişirme Yöntemiyle İncelenmesi", International Iron and Steel Symposium 2012, KARABÜK, TÜRKIYE, 2-4 Nisan 2012, pp.1316-1323
Cora Ö.N., Öztürk B., Koç M., "Micro-Manufacturing Of 3-D Porous Surfaces-Investigation On Porosity And Microhardness", 7th International Conference on MicroManufacturing ICOMM 2012, Evanston, IL, ABD, 11-14 Mart 2012, pp.520-525
Cora Ö.N., Peker M.F., Koç M., "Surface Topography Evolution During Long-Run Micro-Stamping Of Bipolar Plates (Bpps) And Effects On Corrosion And Contact Resistance Characteristics", ASME 2012 International Mechanical Engineering Congress & Exposition IMECE 2012, Houston, TX, ABD, 9-15 Kasım 2012, no.85461, pp.3035-3039 (Link) (Abstract)
Peker M.F., Cora Ö.N., Koc M., "SURFACE TOPOGRAPHY EVOLUTION DURING LONG-RUN MICRO-STAMPING OF BIPOLAR PLATES (BPPS) AND EFFECTS ON CORROSION AND CONTACT RESISTANCE CHARACTERISTICS", ASME International Mechanical Engineering Congress and Exposition, Houston,Texas, ABD, 9-15 Kasım 2012, pp.3035-3039
Cora Ö.N., Koç M., "On The Manufacturing Of Porous Micro-Scale Structure Arrays On Large Surface Areas", Multi-Material Micro Manufacture 4M-2012 Conference, Vienna, AVUSTURYA, 9-11 Ekim 2012, pp.320-323 (Link) (Abstract)
Cora Ö.N., Koç M., Snell R., Decker R. , Huang J., "Experimental Investigations Into The Deformation Behavior Of Thixo-Molded Mg Az61l Sheet Alloy", TMS 2012 Annual Meeting & Exhibition, Orlando, FL, ABD, 11-15 Mart 2012, pp.413-418 (Link)
Koç M., Gedikli H., Cora Ö.N., Burford D., "Numerical Modeling of Indentation Tests to Determination of Mechanical Properties of Friction Stir Welded AA2024-T3 Sheet Alloys", International Conference on Plasticity and Its Current Applications, San Juan, PORTO RIKO, 3-8 Ocak 2012, pp.202-204 (Abstract)
Cora Ö.N., Koç M., Turan C., Peker M.F., Dur E., "On The Corrosion And Contact Resistance Characteristics Of Micro-Stamped Bipolar Plates", Renewable Energy Research Conference – Technoport 2012, Trondheim, NORVEÇ, 16-18 Nisan 2012, pp.1-38 (Link) (Abstract)
Karali M., Cora Ö.N., Nguyen V. , Burford D., Koç M., "Investigation On Bulge Forming Of Friction Stir Welded Aluminum 7075-O At Elevated Temperatures", Materials Science and Technology Conference and Exhibition MS&T 2011, Columbus, OH, ABD, 16-20 Ekim 2011, pp.1-1
Cora Ö.N., Peker M.F., Koç M., "Micro-Stamping Of Pemfc Bipolar Plates-Investigations On The Effect Coating And Surface Quality Interactions On The Corrosion Resistance Characteristics Of Micro-Channeled Metallic Surface Areas", 8th International Conference on Multi-Material Micro Manufacture (4M 2011) , Stuttgart, ALMANYA, 8-10 Kasım 2011, pp.145-148 (Link) (Abstract)
Gedikli H., Cora Ö.N., Koc M., "Determination Of Mechanical Properties Of Friction Stir Welded Alloys Through Uniaxial And Indentation Tests", Materials Science and Technology Conference and Exhibition MS&T 2011, Columbus, OH, ABD, 16-20 Ekim 2011, pp.1-1
Gedikli H., Cora Ö.N., Koç M., "Finite Element Analysis For Warm Hydroforming Of Aluminum Alloys", 17th International Symposium on Plasticity and Its Current Applications, Puerto Vallerta, MEKSIKA, 3-8 Ocak 2011, pp.xxx-xxx
Cora Ö.N., Koc M., Peker M.F., "Investigations Of Micro-Scale Surface Interactions And Tribological Size Effect In Micro-Stamping Of Ss 316l Sheets", Materials Science and Technology Conference and Exhibition MS&T 2011, Columbus, OH, ABD, 16-20 Ekim 2011, pp.1-1
Öztürk B., Cora Ö.N., Koç M., "Mikro Yapıda Üç Boyutlu Yüzeylerin Porozite Ve Mikrosertliğine Üretim Parametrelerinin Etkisi", 6. Uluslararası Toz Metalurjisi Konferansı ve Sergisi, ANKARA, TÜRKIYE, 5-9 Ekim 2011, pp.xxx-xxx
Cora Ö.N., Öztürk B., Koç M., "Effects Of Sintering Temperature On The Porosity And Microhardness Of The Micro-Scale 3-D Porous Gradient Surfaces", 8th International Conference on Multi-Material Micro Manufacture (4M 2011), Stuttgart, ALMANYA, 8-10 Kasım 2011, pp.176-179 (Link) (Abstract)
Cora Ö.N., Ağcayazi A., Koç M., Adamski D.J., Hall J., "Performance Evaluation Of Stamping Die Coatings Via Ring-On-Flat Type Wear Tester", Materials Science & Technology 2011 Conference & Exhibition, Columbus,OH, ABD, 16-20 Ekim 2011, pp.1-1
Öztürk B., Cora Ö.N., Koç M., "Manufacturing of Micro-scale 3-D Porous Gradient Surfaces", The 6th International Conference on MicroManufacturing (ICOMM 2011), Tokyo, JAPONYA, 7-10 Mart 2011, pp.181-186
Kaya I., Cora Ö.N., Koc M., Sheridan J., Fitzgerald C., Wessel D., "Material Characterization Of Ultrasonically Consolidated Laminated Ti-Al Composites (Uc-Lmc)", MS&T Materials Science and Technology 2010 Conference and Exhibition - MS&T 2010, Houston,TX, ABD, 17-21 Ekim 2010, pp.xxx-xxx
Kaya I., Cora Ö.N., Koç M., Fitzgerald C., Sheridan J., Schwope L.A., "Mechanical Behavior Of Uam-Fabricated Al-Ti Lmc Blanks", 2nd Ultrasonic Additive Manufacturing Technology Symposium, Columbus, OH, ABD, 20-21 Ekim 2010, pp.xxx-xxx
Cora Ö.N., Mahabunphachai S., Koç M., "Investigations On The Formability And Surface Topography Of Micro-Channel Arrays On Large Area Plates – Pemfc Metallic Bipolar Plates", 5th International Conference on MicroManufacturing, ICOMM 2010, Madison, WI, ABD, 5-9 Nisan 2010, pp.xxx-xxx
Peker M.F., Cora Ö.N., Koç M., "Investigations On Die Life And Tribological Issues In Micro-Stamping Of Metallic Bipolar Plates For Fuel Cells", International Forum on Micro Manufacturing 2010, Gifu, JAPONYA, 20-23 Ekim 2010, pp.xxx-xxx
Turan C., Dur E., Peker M.F., Cora Ö.N., Koç M., "Corrosion And Contact Resistance Characteristics Of Stamped And Hydroformed Metallic Bipolar Plates For Pemfc", The 8th International Conference on Fuel Cell Science, Engineering and Technology, Brooklyn, NY, ABD, 14-16 Temmuz 2010, pp.545-553 (Link) (Abstract)
Dur E., Turan C., Cora Ö.N., Koç M., "Investigations On The Impact Of Manufacturing Process On Pem Fuel Cell Bipolar Plate Corrosion And Contact Resistance Behavior", International Forum on Micro Manufacturing 2010, Gifu, JAPONYA, 20-23 Ekim 2010, pp.xxx-xxx
Parekh G., Cora Ö.N., Koç M., "Investigation Of Stainless Steel Powder Compaction Process For Manufacturing Of Micro-Porous Surface Feature", International Conferences on Multi-Material Micro Manufacture, 4M/International Conferences on Micro Manufacturing, ICOMM 2009, Karlsruhe, ALMANYA, 23-25 Eylül 2009, vol.2009, pp.119-122 (Link) (Abstract)
Cora Ö.N., Koc M., Koç M., "Influence Of Substrate Material On Wear Performance Of Stamping Dies Utilizing A New Die Wear Test System", 37th Annual North American Manufacturing Research Conference, NAMRC 37, Greenville, SC, ABD, 19-22 Mayıs 2009, vol.37, pp.325-331 (Abstract)
Cora Ö.N., Koç M., "Experimental investigations on wear resistance characteristics of alternative die materials for stamping of Advanced High Strength Steels (AHSS) ", ASME International Manufacturing Science and Engineering Conference, MSEC2008, Evanston, IL, ABD, 7-10 Eylül 2008, vol.2, pp.185-192 (Link) (Abstract)
Cora Ö.N., Koç M., "Effect Of Substrate Hardness On Wear Performance Of Alternative Die Materials For Stamping Of Advanced High Strength Steels", Materials Science and Technology Conference and Exhibition, MS&T 08, Pittsburgh, PA, ABD, 5-9 Ekim 2008, vol.3, pp.1865-1871 (Abstract)
Cora Ö.N., Koç M., Usta Y., "Micro-Manufacturing Of Porous And Modulated Surface Structures For Enhanced Heat Transfer Applications- Experimental Investigations On Process Parameters", The 3rd International Conference on MicroManufacturing (ICOMM 2008), Pittsburgh, PA, ABD, 9-11 Eylül 2008, pp.185-191 (Link)
Cora Ö.N., Koç M., Usta Y., "Experimental Investigations On Development Of Rapid Die Wear Tests For Stamping Of Advanced High Strength Steels", ASME International Manufacturing Science and Engineering Conference 2007, MSEC2007, Atlanta, GA, ABD, 15-18 Ekim 2007, pp.873-879 (Link) (Abstract)
Cora Ö.N., Darendeliler H., Akkök M., "Metal Şekillendirme İşlemlerinin Benzetiminde Sürtünme Katsayısının Kullanıcı Alt Programları (User-Subroutine) Ile Değişken Hale Getirilmesi", Bilgisayar Destekli Mühendislik ve MSC Software Kullanıcı Konferansı '06, İSTANBUL, TÜRKIYE, 1-2 Haziran 2006, ss.159-171 (Özet)
Cora Ö.N., "Nanotechnology In Defence Industry", International German Summer School 2006 on Aviation, Weather and Atmosphere, Braunschweig, ALMANYA, 21 Ağustos - 1 Eylül 2006, pp.1-1
KİTAP ve KİTAP BÖLÜMLERİ
Cora Ö.N., Koç M., "Introduction and state of the art of hydroforming", in: Hydroforming for advanced manufacturing, Muammer Koç, Eds., Woodhead Publishing Limited , Cambridge, pp.1-29, 2008 (Link)
DİĞER YAYINLAR
Cora Ö.N., "Value-Added Manufacturing for Energy and Transportation Industries", Sunum, pp.1-6, 2017 (Link)
Akademik Veri Yönetim Sistemi | All Rights Reserved | Abis Teknoloji © 2018
Karadeniz Teknik Üniversitesi BAP Koordinasyon Birimi